地址:北京市朝阳区南磨房路37号华腾北搪商务大厦22层
工厂:北京市通州区宋庄佰富苑工业园青田国际设计大厦7层
电话:010-86203268 86203269
传真:彩色扫描至qiye@paifst.com
邮箱:qiye@paifst.com
邮政编号:100022
网站:www.paifst.com
全国服务热线:010-86203268
Diacell® CryoDAC-ST
Diamond anvil cell for low temperature micro-spectroscopy applications.
Part of the Diacell® CryoDAC Series.
金刚石压砧,用于低温显微光谱学应用,Diacell® CryoDAC系列中的一款
► The Diacell® CryoDAC-ST has been engineered to fit seamless into sample holder of the Janis ST-500 cryostat.
The Diacell® CryoDAC-ST被设计成可无任何间隙地安装在Janis ST-500低温恒温器的样品架中。
► The height of this DAC and the very short working distance ensure that the sample is located very close the observing top window of the cryostat.
产品的高度和极短的工作距离确保样品可非常接近低温恒温器观察顶窗。
The cell was originally designed for micro-Raman measurements, but it is also suitable for any other microspectroscopy techniques.
适用于显微拉曼光谱测量,同时也适合于其它的显微光谱技术。
► The Diacell® ST-DAC System is the turn-key version including both this DAC and the Janis cryostat.
The Diacell® ST-DAC 系统是包括这款CryoDAC-ST金刚石压砧和Janis低温恒温器在内的最终版本。
► The Diacell® CryoDAC-ST has a numerical aperture of 0.44 and it enables electrical work via its side ports.
The Diacell® CryoDAC-ST的数值孔径为0.44,可通过侧端口进行电气作业。
► Maximum press up to above 30 GPa may be obtained with The Diacell® CryoDAC-ST.
最大压力可达30Gpa以上。
技术规格
Cell Material
电池材料 |
Beryllium Copper Alloy
铍铜合金 |
Anvil Seat (support plate)
铁砧支撑板 |
Beryllium Copper Alloy
铍铜合金 |
Pressure Mechanism 压力机制 |
Screw-driven
螺杆驱动 |
Top Angle 顶角 |
52° along vertical axis
52º沿垂直轴 |
Bottom Angle 底角 |
17° along vertical axis
17º沿垂直轴 |
DAC Diameter DAC直径 |
25 mm increasing to 32mm
25毫米—32毫米 |
DAC Height DAC高度 |
37毫米
|
Working Distance to Sample 样品工作距离 |
8.5毫米
|