LeverDAC-Maxi

Lever arm driven diamond anvil cell for optical work.

Part of the Diacell® LeverDAC Series.

杆臂驱动式金刚石压砧，光学应用，隶属the Diacell® LeverDAC系列。

►  The Diacell® LeverDAC-Maxi is based on a leverage mechanism designed to bring the diamond anvils together. This is the original design of diamond anvil cells.

The Diacell® LeverDAC-Maxi是通过杠杆机制带动金刚石压砧。属于金刚石压砧产品中的基本款。

► The cell is specially suited for any high-pressure optical studies and it has a numerical aperture of 0.44.

特别适用于高压光学研究，数值孔径为0.44。

►  The anvils are mounted mechanically by force fitting them into rings, which then are screwed to their seats. This is a unique feature of Diacell® diamond anvil cells.

通过机械方式将砧强力置入圈中，然后跟砧座拧紧。这是Diacell® 金刚石压砧产品的独特之处。

►  The lever arm drive unit can be disconnected from the cell to facilitate interfacing to spectrometers.

杆臂驱动配件可以跟金刚石压砧断开以方便连接光谱仪。

►  An internal resistive heater and thermocouple are optional. These enable the operation of the LeverDAC-Maxi to temperatures of the order of 500°C.

可选择内部电阻式加热器及热电偶，其可使LeverDAC-Maxi操作温度达到500°C。

►  Maximum pressures of up to above 50 GPa may be obtained with the Diacell® LeverDAC-Maxi.   

最大压力可达50Gpa以上.

技术规格