地址:北京市朝阳区南磨房路37号华腾北搪商务大厦22层
工厂:北京市通州区宋庄佰富苑工业园青田国际设计大厦7层
电话:010-86203268 86203269
传真:彩色扫描至qiye@paifst.com
邮箱:qiye@paifst.com
邮政编号:100022
网站:www.paifst.com
全国服务热线:010-86203268
Screw-driven diamond anvil cell for x-ray applications.
螺杆驱动金刚石压砧,用于X射线应用。
► The Boehler-Almax Plate DAC is based on the innovative design of R. Boehler and employs conical Boehler-Almax anvils supported by tungsten carbide seats as standard.
The Boehler-Almax Plate DAC基于R. Boehler的创新设计,采用锥形Boehler-Almax砧及碳化钨砧座。
► This cell is particularly well suited for x-ray experiments as it enables diffraction measurements with high transmission factor and very low background.
该产品尤其适用于X射线实验,因其能确保高透射因子和极低本底的衍射测量。
► Two kinematically-mounted steel plates are elastically deflected with the use of a driving gearbox. This symmetrical deflection generates the required pressures.
利用齿轮箱驱动,两个按动力学安装(kinematically-mounted)的钢板有弹性地偏转,这种对称偏移产生所需要的压力。
► A gas membrane adaptor kit is available for the Plate DAC. In addition, a Huber goniometer head is also available for this gas membrane adaptor.
气体膜接头套件可用于此产品,另外,Huber测角计头也适用于这种气体膜接头。
► Maximum pressures of up to above 100 GPa are enbaled by the BoehlerAlmax Plate DAC.
该产品可使最大压力达到100Gpa以上。
材料 cell material
|
马氏体时效钢(镍合金)300 Vascomax 300 |
砧座(支撑板)
anvil seat(support plate) |
碳化钨(钨刚)
Tungsten Carbide |
压力机制
Pressure Mechanism |
螺杆驱动
Screw-driven |
顶角
Top Angle |
X-射线:锥形85º
X-ray: Conical 85° |
底角
Bottom Angle |
X-射线:锥形85º
X-ray: Conical 85° |
DAC直径
DAC Diameter |
49毫米 |
DAC高度
DAC Height |
21毫米 |
样品工作距离
Working Distance to Sample |
10.5毫米 |