地址:北京市朝阳区南磨房路37号华腾北搪商务大厦22层
工厂:北京市通州区宋庄佰富苑工业园青田国际设计大厦7层
电话:010-86203268 86203269
传真:彩色扫描至qiye@paifst.com
邮箱:qiye@paifst.com
邮政编号:100022
网站:www.paifst.com
全国服务热线:010-86203268
Screw-driven diamond anvil cell for high-temperature microspectroscopy studies.
Part of the Diacell® μScopeDAC series.
螺杆驱动金刚石压砧,用于高温显微光谱学研究,Diacell® μScopeDAC系列中的一款
► The Diacell® μScopeDAC-HT(S) meets the need for very high pressures, compatibility with commercially available spectroscopic microscopes and high temperatures.
The Diacell® μScopeDAC-HT(S)这款产品适用于超高压需求,且也兼容与商用光谱显微镜和高温条件。
► This cell is ideal for optical work in FTIR and Raman microscopes.
该产品非常适合FTIR(傅氏转换红外线光谱分析仪)和拉曼显微镜的光学作业。
► An internal gasket heater enables research up to 600°C. Water cooling ports are also present.
内置密封垫加热器可使研究达到600°C。也存在水冷却端口。
► The μScopeDAC-HT(S) has a numerical aperture of 0.44.
The μScopeDAC-HT(S)数值孔径为0.44。
► A combination of left- and right-handed screws makes sure that there is no net torque on the cell as pressure is applied.
正反向螺杆的组合使用确保施加压力时,砧上不会产生净力矩。
► Maximum pressures of up to above 50 GPa are obtained with the Diacell®μScopeDAC-HT(S).
最大压力可达50Gpa。
技术规格:
材料
cell material |
不锈钢AISI 440C
Stainless Steel AISI 440C |
砧座(支撑板)
anvil seat(support plate) |
碳化钨(钨刚)
Tungsten Carbide |
压力机制
Pressure Mechanism |
螺杆驱动(RH+LH 螺栓)
Screw-driven (RH+LH bolts) |
顶角
Top Angle |
锥形52º
Conical 52° |
底角
Bottom Angle |
锥形52º
Conical 52° |
DAC直径
DAC Diameter |
60毫米 |
DAC高度
DAC Height |
25毫米 |
样品工作距离
Working Distance to Sample |
12毫米 |