地址:北京市朝阳区南磨房路37号华腾北搪商务大厦22层
工厂:北京市通州区宋庄佰富苑工业园青田国际设计大厦7层
电话:010-86203268 86203269
传真:彩色扫描至qiye@paifst.com
邮箱:qiye@paifst.com
邮政编号:100022
网站:www.paifst.com
全国服务热线:010-86203268
Diacell® Bragg-(S) & Bragg-(S) Plus
Diacell®布拉格(S)和布拉格(S)Plus
Screw-driven diamond anvil cell for x-ray application.
Part of the Diacell® Bragg Series.
螺杆驱动金钢石压砧,X射线应用设备部件。Diacell®布拉格系列中的一款。
► The Diacell® Bragg-(S) is recommended for for x-rays experiments. The Bragg-(S)Plus, which uses conical Boehler Almax anvils, makes this cell ideal for high pressure x-ray research.
The Diacell®布拉格(S)适用于X射线实验。The Diacell®布拉格-(S)Plus,搭配Boehler Almax锥形砧,更完美地应用于高压X射线研究中。
► The large angle apertures enable diffraction work with high transmission factor and very low background.
大角孔确保高透射因子和极低本底的衍射作业。
► The Diacell® Bragg-(S) Plus also lends itself to optical experiments at high pressures.
The Diacell®布拉格-(S)Plus,也适用于高压下光学实验。
► A combination of left- and right-handed screws makes sure that there is no net torque on the cell
左右旋螺栓组合确保金刚石压砧没有净力矩。
► It is relatively easy to convert the Bragg-(S) into a Bragg-(S) Plus and vice-versa.
比较容易把the Bragg-(S)转换成Bragg-(S)Plus,反之亦然。
► Maximum pressures of up to above 100 GPa may be obtained with the Bragg-(S) and Bragg-(S) Plus.
两款产品最高压力皆达到100 Gpa以上。
Technical Specifications:
技术规格
|
Diacell® Bragg-(S) & Bragg-(S) Plus |
材料cell material |
不锈钢AISI 440C
Stainless Steel AISI 440C |
砧座(支撑板)
anvil seat(support plate) |
(S)版 ,“铍”, (S)Plus版“钨钢”
Be for (S), WC for (S)Plus version |
压力机制
Pressure Mechanism |
螺杆驱动
Screw-driven |
顶角
Top Angle |
X-射线:(S)版,锥形90º;(S)Plus版,85º
X-ray: Conical 90° (G), 85 º (G)Plus |
底角
Bottom Angle |
X-射线:(S)版,锥形90º;(S)Plus版,85º
X-ray: Conical 90° (G), 85 º (G)Plus |
DAC直径
DAC Diameter |
N / A |
DAC高度
DAC Height |
35毫米。
35 mm |
样品工作距离
Working Distance to Sample |
14毫米 14 mm |